Well, my r6 is approaching 26k (still runs like a champ!), and it getting about time to have a valve adjustment done on the bike. So i was just wondering if anyone has had this done, and about how much of a bill i should expect. Thanks.
I have a 2000 R6 at 17k miles and just finished a valve job. expect quite a few hours to do it, if it needs adjusted. They tend to run at least 300 bucks (figure around 75 bucks an hour times at least 4 hours to do the job at a shop). i picked up shims from a local shop for 6 bucks a pop. considering there is a maximum of 16 shims its not too bad.