RidersDiscount
03-01-2010, 10:33 AM
The Power Commander V is an evolutionary design that takes the capabilities of the previous Power Commander III USB and builds on those in a simple, easy to use manner. Smaller than the previous version, with the PC-V the user may make fuel value adjustments without the bike running or needing a 9V power supply. The PCV now has the ability to build maps for each cylinder in each gear – theoretically making it possible for 24 individual maps to be loaded onto the device per master fuel map for maximum power output and precise throttle response.
Dynojet has also included the ability to add their AutoTune module for on-the-fly fuel mapping. With this, you may precisely trim your bike’s map based on the fuel used, atmospheric conditions or set it up for maximum economy.
Available for late-model YZF-R6 motorcycles, call Nate at 866.931.6644 ext 809 to get one of these devices sent your way today. You can also email us - send those to FORUM at RIDERSDISCOUNT dot COM with the subject line PCV and we’ll get back to you right away.
For those of you with an older, non-backwards compatible R6, we have the PC-III USB on hand for you.
Everything you need to set up your bike is included in one box: clear instructions, USB cable, PC-V, software CD-ROM, Velcro strips for securing the Power Commander and stickers.
http://www.ridersdiscount.com/forum/dynojet/power_commander_v_1.jpg
Two expansion ports are built into the PC-V’s chassis for add-on capabilities like the AutoTune and Secondary Fuel Controller Module (to run all eight injectors).
http://www.ridersdiscount.com/forum/dynojet/power_commander_v_2.jpg
USB Port is hidden behind a protective rubber gasket. No longer do you need to have your bike running or use a 9V power supply to upload new maps.
http://www.ridersdiscount.com/forum/dynojet/power_commander_v_4.jpg
Seven accessory inputs for a map select switch, speed sensor, quick shifter, crank trigger data and one analog input for a 0-5v source like engine temp.
http://www.ridersdiscount.com/forum/dynojet/power_commander_v_3.jpg
Dynojet has also included the ability to add their AutoTune module for on-the-fly fuel mapping. With this, you may precisely trim your bike’s map based on the fuel used, atmospheric conditions or set it up for maximum economy.
Available for late-model YZF-R6 motorcycles, call Nate at 866.931.6644 ext 809 to get one of these devices sent your way today. You can also email us - send those to FORUM at RIDERSDISCOUNT dot COM with the subject line PCV and we’ll get back to you right away.
For those of you with an older, non-backwards compatible R6, we have the PC-III USB on hand for you.
Everything you need to set up your bike is included in one box: clear instructions, USB cable, PC-V, software CD-ROM, Velcro strips for securing the Power Commander and stickers.
http://www.ridersdiscount.com/forum/dynojet/power_commander_v_1.jpg
Two expansion ports are built into the PC-V’s chassis for add-on capabilities like the AutoTune and Secondary Fuel Controller Module (to run all eight injectors).
http://www.ridersdiscount.com/forum/dynojet/power_commander_v_2.jpg
USB Port is hidden behind a protective rubber gasket. No longer do you need to have your bike running or use a 9V power supply to upload new maps.
http://www.ridersdiscount.com/forum/dynojet/power_commander_v_4.jpg
Seven accessory inputs for a map select switch, speed sensor, quick shifter, crank trigger data and one analog input for a 0-5v source like engine temp.
http://www.ridersdiscount.com/forum/dynojet/power_commander_v_3.jpg